die cavityの例文

例文携帯版

To avoid these problems, mechanized feeder can employ to force granules into die cavity.
As the punch force increases the metal flows from the flange region in to the die cavity.
Mechanical force is applied on the part of the metal blank above the die cavity through a punch.
In this type of forging the die cavities are completely closed, which keeps the workpiece from forming flash.
Closed-die forging has a high initial cost due to the creation of dies and required design work to make working die cavities.
At the beginning, the blank is brought into contact with the die cavity, hindering the forming process by the blank / die interface friction.
Upon closing of the die sections 42 and 44, the liquid inside the tube 30 resists compression and forces the tube walls to conform to the die cavity shape.
When a tablet press is used for dry granulation, the powders may not possess enough natural flow to feed the product uniformly into the die cavity, resulting in varying degrees of densification.